How to Clean, Care for, and Store Your Silicone Breast Forms: The Complete Guide

Silicone breast forms are a significant investment — and with the right care, Femmevee platinum silicone breast forms are designed to last for years of regular wear. The difference between a breast form that looks and feels as good in year three as it did on day one, and one that deteriorates within months, comes down almost entirely to cleaning and storage habits.

This guide covers everything: daily cleaning, deep cleaning, odour prevention, bra care, travel routines, long-term storage, and how to identify when your breast forms need attention. The guidance is written specifically for Femmevee products — platinum silicone with a hand-painted, multi-tone airbrush finish — but the principles apply to all quality silicone breast forms.

Why Femmevee Breast Forms Require Specific Care

Not all breast forms are made the same way, and care requirements differ by material. Femmevee breast forms are made from platinum-cured silicone — the same material class used in medical implants and food-grade products. This is a fundamentally different material from foam, fibrefill, or standard silicone, and it has specific properties that both enable and require particular care.

What makes platinum silicone different: it's non-porous (bacteria cannot penetrate the surface), chemically inert (it doesn't react with skin or most cleaning agents), and highly durable (it doesn't degrade from water contact). These properties make it the safest and most realistic material available for breast forms.

What makes Femmevee breast forms additionally specific: each form is hand-painted with a multi-tone airbrush finish that creates the realistic skin-tone variation and surface detail that distinguishes Femmevee from mass-produced alternatives. This finish is applied to the silicone surface and is what makes the breast forms look like natural tissue rather than a uniform-coloured product. Protecting this finish requires the same gentle approach as the silicone itself — but it's worth being explicit about, because it's the detail that most affects the long-term appearance of the product.

With correct care, you can expect Femmevee breast forms to maintain their shape, surface quality, and realistic appearance for 2–5 years of regular wear. Incorrect care — particularly harsh cleaning agents, abrasive materials, or improper storage — can reduce this significantly.

Daily Cleaning: The After-Wear Routine

Clean your breast forms after every wearing session. This is non-negotiable — it's the single practice that most determines how long your breast forms last and how safe they remain for skin contact. Perspiration, skin oils, cosmetic residue, and any skin care products that contacted the surface during wear all accumulate and, if left, affect both the surface finish and the skin safety of the product.

What you need: mild, fragrance-free soap (baby soap, a gentle facial cleanser, or a dedicated silicone cleaner), lukewarm water, and your clean hands or a soft lint-free cloth. Nothing abrasive — no sponges, brushes, or textured cloths.

Step-by-Step Cleaning Process

Step 1 — Rinse with lukewarm water. Hold the breast form under lukewarm running water to loosen surface residue. Lukewarm, not hot — hot water doesn't improve cleaning and can affect the silicone surface and painted finish over time.

Step 2 — Apply mild soap. Apply a small amount of mild, fragrance-free soap to your clean hands. Gently work the soap over the entire surface — front, back, and edges. The back surface (the skin-contact side) accumulates the most perspiration and skin oils; give it particular attention. Use circular motions with light pressure — never scrub.

Step 3 — Rinse thoroughly. Rinse under lukewarm running water until every trace of soap is gone. Soap residue left on the surface is one of the most common causes of skin irritation during subsequent wear, and can affect the painted finish over time. When in doubt, rinse longer.

Step 4 — Pat dry. Pat the breast form dry with a clean, soft cloth. Do not rub — rubbing creates friction against the painted finish. Pat gently until the surface is no longer wet to the touch.

Step 5 — Air dry completely. Place the breast form on a clean, soft surface — a folded towel works well — and allow it to air dry completely before storing. This typically takes 30–60 minutes. Never store a breast form that is still damp; moisture trapped in storage creates conditions that affect the surface over time.

Deep Cleaning: Monthly Maintenance

In addition to the daily after-wear routine, a more thorough deep clean once a month — or after any session involving heavy perspiration, sunscreen, or significant cosmetic application — removes buildup that daily cleaning may not fully address.

Deep cleaning process: Fill a clean basin with lukewarm water and add a small amount of mild soap. Submerge the breast form and gently work the soap over the entire surface, including any textured areas and the edges. Allow to soak for 5–10 minutes. Rinse thoroughly under running water, pat dry, and air dry completely before storing.

What Never to Use on Femmevee Breast Forms

The following will damage the silicone, the painted finish, or both — some immediately, some cumulatively over time:

  • Alcohol or alcohol-based products — degrades the silicone surface and strips the painted finish
  • Bleach, disinfectants, or antibacterial sprays — chemically incompatible with platinum silicone; causes surface damage
  • Abrasive cleaners, scrubbing pads, or textured cloths — scratches the surface and damages the hand-painted finish irreversibly
  • Oil-based soaps or cleansers — leaves a residue that's difficult to remove and can affect skin contact
  • Dishwasher or washing machine — the mechanical action, heat, and detergents are all incompatible with silicone breast forms
  • Boiling water or steam cleaning — excessive heat distorts the silicone and damages the finish
  • Silicone-based lubricants or products — can bond with the silicone surface and are very difficult to remove
  • Ultrasonic cleaners — the vibration can affect the internal structure of the silicone

Odour Prevention and Management

Platinum silicone is non-porous, which means it doesn't absorb odours the way porous materials do. Odour in silicone breast forms is almost always surface residue — perspiration, skin oils, or product buildup that wasn't fully removed during cleaning — rather than anything absorbed into the material.

Prevention is straightforward: clean thoroughly after every wear, ensure all soap is rinsed completely, and allow the breast form to air dry fully before storing. These three steps prevent virtually all odour issues.

If odour develops: a deep clean (see above) will address surface buildup. For persistent odour, a soak in lukewarm water with a small amount of white vinegar (1 tablespoon per litre of water) for 10 minutes, followed by thorough rinsing and air drying, can help. Do not use baking soda directly on the surface — it's mildly abrasive and can affect the painted finish.

Storage odour: if the storage box or pouch develops an odour, clean it separately. A breast form stored in a clean-smelling environment will stay fresher between wears.

Bra Care: The Often-Overlooked Factor

The bra that holds your breast forms is in direct contact with them during every wearing session. A bra that isn't clean transfers residue — detergent, fabric softener, perspiration, body oils — to the breast form surface. This is one of the most common sources of surface buildup that wearers don't immediately identify.

Wash your bra regularly. For regular wearers, washing the bra after every 2–3 wearing sessions is appropriate. Use a gentle, fragrance-free detergent and rinse thoroughly.

Avoid fabric softener. Fabric softener leaves a residue on fabric that transfers to the breast form surface during wear. Use a fragrance-free detergent without softener for bras worn with breast forms.

Allow the bra to dry completely before wearing. A damp bra creates moisture at the breast form contact surface — the same condition that daily cleaning is designed to prevent.

Femmevee breast forms and bra fit: the realistic weight and feel of Femmevee platinum silicone breast forms means they sit naturally in a well-fitted bra without requiring adhesive. A bra that fits correctly — with cups that fully contain the breast form — provides the best combination of security and surface protection.

Skin Care Products and Cosmetics: Compatibility Guide

Products that contact the breast form surface during wear — moisturisers, sunscreen, body makeup, contouring products — vary in their compatibility with platinum silicone and the painted finish.

Compatible: water-based moisturisers and lotions, fragrance-free products, mineral sunscreens (zinc oxide or titanium dioxide based), water-based body makeup and foundation.

Incompatible or use with caution: oil-based products (leave residue that's difficult to remove), chemical sunscreens (some UV filters affect silicone surfaces over time), products containing alcohol (degrade the painted finish), silicone-based primers or products (can bond with the surface).

If you use cosmetics on your breast forms: use a gentle, oil-free makeup remover before the standard cleaning routine. Don't rely on soap alone to remove cosmetics that have been on the surface for an extended period. Avoid heavy cosmetic buildup — repeated application without thorough removal accumulates over time and affects both appearance and skin safety.

Travel Care: The Simplified Routine

Travelling with breast forms doesn't require the full home routine, but it does require some preparation to maintain care standards on the road.

What to pack: a small bottle of mild, fragrance-free soap (under 100ml for carry-on), a soft lint-free cloth, and a zip-lock bag or travel pouch for storage. The breast forms' original box is ideal for checked luggage; a padded pouch works for carry-on.

The travel cleaning routine: the same steps as the daily routine, adapted for a hotel bathroom. Lukewarm water from the tap, mild soap, thorough rinse, pat dry with a clean cloth, air dry on a clean surface before storing. The routine takes the same 5–10 minutes regardless of location.

Hotel room storage: store in the travel pouch or zip-lock bag, away from direct sunlight (not on the windowsill) and away from heat sources (not near the radiator or in a hot car). A drawer or the interior of a bag is appropriate.

Airport security: breast forms pass through standard security without issue. Platinum silicone is not detected by metal detectors and appears as soft tissue on body scanners. You don't need to disclose or remove them at security.

Long-Term and Seasonal Storage

If you're storing your breast forms for an extended period — weeks or months — the storage conditions matter more than for short-term between-wear storage.

Clean thoroughly before long-term storage. Any residue left on the surface during extended storage has more time to affect the surface. Deep clean before storing for more than a week.

Ensure complete dryness. Moisture trapped during long-term storage is more problematic than during short-term storage. Allow the breast forms to air dry for at least 2 hours before placing in long-term storage.

Use the original box. The original Femmevee packaging is designed to support the breast form in its natural shape without compression. For long-term storage, this is the best option. If the original box is no longer available, a rigid container that allows the breast form to sit without compression is appropriate.

Include a silica gel packet. A small silica gel packet in the storage box absorbs any residual moisture and keeps the storage environment dry during extended storage. Replace the packet every few months.

Check periodically. For storage longer than a month, check the breast forms every 4–6 weeks — inspect the surface, check for any odour, and ensure the storage environment remains appropriate.

Quick Reference: Care and Storage Summary

Situation Do Don't
After every wear Clean with mild soap and lukewarm water; pat dry; air dry completely Store without cleaning; use hot water; scrub
Monthly Deep clean with 5–10 min soak; inspect surface and finish Skip monthly inspection
Cleaning agents Mild fragrance-free soap, baby soap, gentle facial cleanser Alcohol, bleach, oil-based soap, abrasives, silicone-based products
Drying Pat dry with soft cloth; air dry 30–60 min before storing Rub dry; store while damp; use heat to speed drying
Short-term storage Original box or soft pouch; cool, dark, dry location In bra; loose in drawer; near heat or sunlight
Long-term storage Deep clean first; original box; silica gel packet; check every 4–6 weeks Store with residue; in compression; without moisture control
With other products Store separately; separate silicone products with soft cloth In direct contact with other silicone products
Cosmetics on forms Water-based products; remove with oil-free remover before cleaning Oil-based products; silicone-based primers; heavy buildup
Bra care Wash regularly with fragrance-free detergent; no fabric softener Wear unwashed bra with breast forms; use fabric softener
Travel Pack mild soap and soft cloth; store in padded pouch or original box Leave in direct sunlight; store in hot car

Identifying When Your Breast Forms Need Attention

Regular inspection — ideally after each cleaning — allows you to identify issues early. Check the following:

Surface condition. The surface should be smooth, consistent, and non-sticky. Stickiness after thorough cleaning indicates either soap residue (rinse again) or a surface change (review products used). Roughness or surface inconsistency that wasn't there before warrants attention.

Painted finish. Femmevee's hand-painted, multi-tone finish should remain consistent in colour and texture. Fading or colour changes are most commonly caused by UV exposure, alcohol-based products, or abrasive cleaning. If the finish is affected, review your care practices — and note that finish changes are usually gradual, not sudden.

Shape. The breast form should maintain its natural shape. Persistent flattening or asymmetry typically indicates storage compression. Allow the breast form to rest in its natural shape for 24 hours — if the shape doesn't recover, the compression may have been sustained long enough to cause permanent distortion.

Edges. Check the edges for any cuts, tears, or separation. Edge damage can worsen over time. Minor edge issues can sometimes be stabilised; significant edge damage typically indicates replacement is needed.

Skin reaction. New skin irritation at the contact area — particularly if it wasn't present before — may indicate cleaning residue, a product compatibility issue, or a surface change. Review your cleaning routine and the products you're using before attributing the reaction to the breast form itself.

When to Replace Your Breast Forms

With correct care, Femmevee platinum silicone breast forms are designed for 2–5 years of regular wear. The following are signs that replacement is appropriate:

  • Significant surface degradation that doesn't resolve with cleaning
  • Persistent shape distortion that doesn't recover after uncompressed rest
  • Finish damage that significantly affects the realistic appearance
  • Edge damage that has progressed to the point of affecting the form's integrity
  • Persistent skin irritation that can't be attributed to cleaning products or skin care

When it's time to replace, see our breast forms buying guide for guidance on selecting the right replacement — including how to use your existing breast form's skin tone as a reference for matching.

Shop the Femmevee Breast Forms Collection →

Frequently Asked Questions

Q: How often should I clean my breast forms?
A: After every wearing session, without exception. Perspiration, skin oils, and any products that contacted the surface should be removed after each wear. A monthly deep clean is also recommended for regular wearers.

Q: Can I use antibacterial soap?
A: A mild, fragrance-free antibacterial soap is acceptable, but unnecessary — platinum silicone's non-porous surface doesn't harbour bacteria. A gentle baby soap or facial cleanser is sufficient and less likely to contain additives that affect the surface over time.

Q: My breast forms feel sticky after cleaning — what's wrong?
A: Stickiness after cleaning almost always indicates soap residue that wasn't fully rinsed. Rinse again under lukewarm running water until the surface feels smooth. If stickiness persists after thorough rinsing, review the products you've been using on or near the breast forms.

Q: Can I store my breast forms in my bra?
A: No. Store in the original box or a dedicated soft pouch. Storing in a bra keeps the breast forms under compression and in contact with fabric that may transfer detergent residue, dyes, or fibres to the surface over time.

Q: The painted finish is fading — what caused this?
A: The most common causes are UV exposure (sunlight), alcohol-based products, and abrasive cleaning. Review your care and storage practices. If the finish has faded significantly, the breast forms may be approaching the end of their useful life.

Q: How long should Femmevee breast forms last?
A: With correct care — cleaning after every wear, monthly deep cleaning, and proper storage — Femmevee platinum silicone breast forms are designed for 2–5 years of regular wear. The painted finish may show some fading before the silicone itself shows wear.

Q: How do I care for breast forms and a pussy panty together?
A: The care routine is identical for both products — mild soap, lukewarm water, pat dry, air dry completely, store separately. Clean both after every wearing session. See our combination guide for more on using both products together.

Related Guides

Silicone breast forms are a significant investment — in both money and the experience they provide. How you care for them determines how long they last, how realistic they continue to look, and how safe they remain for skin contact. A breast form that's cleaned and stored correctly can last for years; one that's neglected can deteriorate in months.

This guide covers the complete care routine for Femmevee silicone breast forms — daily cleaning, deep cleaning, storage, what to avoid, and how to identify when a breast form needs attention. The principles here apply to all platinum silicone breast forms, but the specific guidance is written for Femmevee products.

Why Platinum Silicone Requires Specific Care

Femmevee breast forms are made from platinum-cured silicone — the same material class used in medical implants and food-grade products. This material is non-porous, chemically inert, and highly durable. It doesn't absorb bacteria, doesn't react with skin, and doesn't degrade from water contact.

What platinum silicone does require is protection from specific threats: sharp objects that can cut or puncture the surface, certain chemicals that can degrade the silicone matrix, sustained compression that can distort the shape, and UV exposure that can affect the surface finish over time. Understanding these threats is the foundation of correct care.

The hand-painted, multi-tone airbrush finish on Femmevee breast forms — the detail that makes them look realistic — is applied to the silicone surface and requires gentle handling to maintain. Abrasive cleaning, harsh chemicals, and rough storage conditions can affect this finish over time. The cleaning and storage guidance in this guide is designed to protect both the silicone and the finish.

Daily Cleaning: The After-Wear Routine

Clean your breast forms after every wearing session. This is the single most important care practice — more important than any other step in this guide. Perspiration, skin oils, and cosmetic residue accumulate on the surface during wear and, if left, can affect both the surface finish and the skin safety of the product.

What you need: mild, fragrance-free soap (baby soap or a gentle facial cleanser works well), warm water, and a soft cloth or your clean hands. Do not use a sponge, brush, or any abrasive material.

The cleaning process:

Step 1: Rinse with warm water. Hold the breast form under warm running water to remove surface residue. Use water that's comfortably warm — not hot. Hot water doesn't clean better and can affect the silicone surface over time.

Step 2: Apply mild soap. Apply a small amount of mild, fragrance-free soap to your clean hands or a soft cloth. Gently work the soap over the entire surface of the breast form — front, back, and edges. Pay particular attention to the back surface (the skin-contact side) where perspiration and skin oils accumulate most.

Step 3: Rinse thoroughly. Rinse the breast form under warm running water until all soap residue is removed. Soap residue left on the surface can cause skin irritation during the next wearing session and can affect the surface finish over time.

Step 4: Pat dry. Pat the breast form dry with a clean, soft cloth. Do not rub — rubbing can affect the surface finish. Pat gently until the surface is no longer wet.

Step 5: Air dry completely. Place the breast form on a clean, soft surface and allow it to air dry completely before storing. This typically takes 30–60 minutes depending on the environment. Do not store a breast form that is still damp — moisture trapped in storage can affect the surface over time.

Deep Cleaning: When and How

In addition to the daily after-wear cleaning, a more thorough deep clean is beneficial periodically — approximately once a month for regular wearers, or whenever the breast form has been exposed to something that requires more thorough cleaning (heavy perspiration, cosmetic products, sunscreen).

Deep cleaning process: Fill a clean basin with warm water and add a small amount of mild soap. Submerge the breast form and gently work the soap over the entire surface, including any textured areas. Allow the breast form to soak for 5–10 minutes. Rinse thoroughly under running water, pat dry, and air dry completely.

What not to use for cleaning:

  • Alcohol or alcohol-based products — degrades the silicone surface and can affect the painted finish
  • Bleach or disinfectants — chemically incompatible with platinum silicone; can cause surface damage
  • Abrasive cleaners or scrubbing pads — scratches the surface and damages the painted finish
  • Oil-based soaps or cleansers — leaves a residue that's difficult to remove and can affect skin contact
  • Dishwasher or washing machine — the mechanical action and heat are too aggressive for silicone breast forms
  • Ultrasonic cleaners — the vibration can affect the internal structure of the silicone

Storage: Protecting Your Investment

How you store your breast forms between wearing sessions is as important as how you clean them. Incorrect storage is one of the most common causes of premature deterioration.

Use the original box or a dedicated pouch. Femmevee breast forms come with storage packaging designed for the product. Use this packaging — it's shaped to support the breast form correctly and protect it from compression and contact damage. If the original packaging is no longer available, a soft cloth pouch or a dedicated silicone storage box is appropriate.

Store away from direct sunlight. UV exposure affects the surface finish of silicone breast forms over time — causing colour changes and surface degradation. Store in a drawer, a box, or a bag that protects from light exposure. Don't leave breast forms on a windowsill or in a car.

Store away from heat sources. High temperatures can affect the silicone's shape and surface. Don't store near radiators, in direct sunlight, or in spaces that get very warm (a car in summer, for example).

Don't store under compression. Sustained compression — storing the breast form under heavy objects, or in a space that's too small — can distort the shape over time. The storage space should allow the breast form to sit in its natural shape without pressure.

Store separately from other silicone products. Silicone surfaces can bond if stored in contact with each other over time. Store breast forms separately from silicone pussy panties and other silicone products. If storing multiple breast forms, separate them with a soft cloth.

Keep away from sharp objects. Platinum silicone is durable but not puncture-proof. Store away from jewellery, pins, scissors, and other sharp objects that could cut or puncture the surface.

Care and Avoid Summary

Category Do Don't
Cleaning frequency After every wearing session Skip cleaning after wear
Cleaning agent Mild, fragrance-free soap Alcohol, bleach, oil-based soap, abrasives
Cleaning method Gentle hand washing with soft cloth Scrubbing, dishwasher, washing machine
Water temperature Comfortably warm Hot water
Drying Pat dry, then air dry completely Rub dry; store while damp
Storage container Original box or soft pouch Loose in a drawer with other items
Storage environment Cool, dark, dry Direct sunlight, heat sources, damp spaces
Storage position Natural shape, no compression Under heavy objects; in too-small space
Storage with other products Separated by soft cloth In direct contact with other silicone
Sharp objects nearby Keep away Store near jewellery, pins, scissors

Skin Care Products and Breast Forms

Many wearers use skin care products — moisturisers, body lotions, sunscreen — that come into contact with the breast form during wear. Some of these products are compatible with platinum silicone; others can affect the surface over time.

Compatible: water-based moisturisers and lotions, fragrance-free products, mineral sunscreens (zinc oxide or titanium dioxide based).

Incompatible or use with caution: oil-based products (can leave residue that's difficult to remove), chemical sunscreens (some chemical UV filters can affect silicone surfaces over time), products containing alcohol (can degrade the surface finish), products containing silicone oils (can affect the surface of the breast form).

If you use skin care products that come into contact with the breast form, clean the breast form more thoroughly after wearing — ensuring all product residue is removed before storage.

Cosmetics and Breast Forms

Some wearers apply cosmetics to their breast forms — foundation or body makeup to blend the breast form's skin tone with their natural skin, or contouring products to enhance the appearance. This is possible with platinum silicone, but requires specific care.

Use water-based cosmetics. Water-based foundation and body makeup are easier to remove from silicone than oil-based products. Apply lightly and remove thoroughly after wearing.

Remove cosmetics before cleaning. Use a gentle, oil-free makeup remover to remove cosmetic products before the standard cleaning routine. Don't rely on soap alone to remove cosmetics — particularly if they've been on the surface for an extended period.

Avoid heavy cosmetic buildup. Repeated application of cosmetics without thorough removal can build up on the surface over time, affecting both the appearance and the skin safety of the product. Clean thoroughly after every session where cosmetics have been applied.

Identifying When Your Breast Forms Need Attention

Regular inspection of your breast forms allows you to identify issues early — before they become significant. Check the following after cleaning:

Surface condition. The surface should be smooth and consistent. Any roughness, stickiness, or surface changes that weren't there before are worth noting. Minor surface changes are often addressable; significant surface degradation may indicate that the product is approaching the end of its useful life.

Painted finish. The hand-painted finish should remain consistent in colour and texture. Fading, peeling, or colour changes can result from exposure to incompatible products, UV exposure, or abrasive cleaning. If the finish is affected, review your cleaning and storage practices.

Shape. The breast form should maintain its natural shape. Any persistent distortion — flattening, asymmetry, or shape changes — may indicate storage compression or other issues.

Edges. Check the edges of the breast form for any cuts, tears, or separation. Edge damage can worsen over time if not addressed.

Skin reaction. If you notice skin irritation at the breast form contact area that wasn't present before, this may indicate a cleaning residue issue, a product compatibility issue, or a surface change in the breast form. Review your cleaning routine and the skin care products you're using.

Lifespan: What to Expect

With correct care, Femmevee platinum silicone breast forms are designed for years of use. The specific lifespan depends on wearing frequency, care practices, and storage conditions. Wearers who clean and store correctly and wear regularly can expect significantly longer product life than those who don't.

The painted finish typically shows wear before the silicone itself does — colour may fade slightly over years of use, particularly if the breast forms are exposed to sunlight or incompatible products. The silicone structure itself is more durable than the finish.

When a breast form reaches the end of its useful life — significant surface degradation, persistent shape distortion, or finish damage that affects the realistic appearance — replacement is appropriate. See our breast forms buying guide for guidance on selecting a replacement.

Shop the Femmevee Breast Forms Collection →

Frequently Asked Questions

Q: How often should I clean my breast forms?
A: After every wearing session, without exception. Perspiration, skin oils, and any cosmetic or skin care products that contact the surface should be removed after each wear. A monthly deep clean is also recommended for regular wearers.

Q: Can I use antibacterial soap to clean my breast forms?
A: A mild, fragrance-free antibacterial soap is acceptable, but it's not necessary — platinum silicone's non-porous surface doesn't harbour bacteria. A gentle baby soap or facial cleanser is sufficient and less likely to contain additives that could affect the surface over time.

Q: My breast forms feel slightly sticky after cleaning — what's wrong?
A: Stickiness after cleaning usually indicates soap residue that wasn't fully rinsed. Rinse again under warm running water until the surface feels smooth and clean. If stickiness persists after thorough rinsing, it may indicate a surface change — review the products you've been using on or near the breast forms.

Q: Can I store my breast forms in the bra I wear them in?
A: No. Store breast forms in their original box or a dedicated soft pouch, away from compression and contact with other materials. Storing in a bra keeps them under compression and in contact with fabric that may transfer dyes or fibres to the surface over time.

Q: The painted finish on my breast forms is fading — what caused this?
A: The most common causes of finish fading are UV exposure (sunlight), incompatible cleaning products (alcohol, abrasives), and oil-based products that weren't fully removed. Review your cleaning and storage practices. If the finish has faded significantly, the breast forms may be approaching the end of their useful life.

Q: How do I care for breast forms and a pussy panty together?
A: The care routine is identical for both products — mild soap, warm water, pat dry, air dry, store separately. Clean both after every wearing session. Store each in its own pouch or box, separated from each other. See our combination guide for more on using both products together.

Related Guides

Back to blog